Mark 2 Multipoint Gearbox – Lift Lever

SKU: DGSMK235 Category: Multipoint Gearboxes Brand: DGS

£115^.00

Manufacturer: DGS
Backset: 28mm, 35mm, 40mm, 45mm or 55mm – How do I measure the backset?
Centres PZ: 92mm – How do I measure the centres?
Case Height: 191mm
Case Width: Backset + 16mm
Copy/Genuine: Genuine
Cylinder Type: Euro
Handing: Not Handed
Main Gearbox: Latch & deadbolt
Spindle: Single 8mm
Operation: Lift Lever – What is the operation?
Packaging: Supplied in singles

500 in stock (can be backordered)

DGS multipoint lock gearboxes feature a latch and deadbolt and measure 191mm high (excluding the fixing lugs) by the backset + 16mm wide. The latch is 32mm high, the deadbolt measures 35mm high and there is 54mm from the bottom of the latch to the top of the deadbolt.

DGS gearboxes are fixed to their faceplates with 3 screws. The distance from the top to the middle screw is 108mm, while the middle screw to the bottom screw is 92mm.

Always allow 2mm when measuring your backset and the faceplate is still attached to the gearbox.

Not compatible with old style locks.

Operation: Lift lever

Latch reversal: Twist latch into desired position.

To lock the door

1. Lift the handle upwards to engage the locking points.

2. Lock the locking points and main deadbolt (if present) by turning the key.

To unlock the door

1. Unlock the system by turning the key.

2. Push the handle downwards to disengage the locking points and retract the latch.